Public concern about Cr(VI) in drinking water supplies and potential adverse health effects prompted the City of Glendale and its partners to initiate a four-phase program identifying and implementing cost-effective Cr(VI) treatment. Three effective technologies were identified from initial testing: WBA resin, regenerable SBA resin, and RCF. WBA resin was distinctive in its high Cr(VI) capacity and simplicity but was a new technology. Thus, further study was needed.? The key objectives of this project included (1) conducting treatment studies to confirm the efficiencies of weak-base anion (WBA) exchange resins for hexavalent chromium [Cr(VI)] removal from groundwater; (2) characterizing WBA resin residuals to elucidate Cr(VI) removal mechanism(s); (3) investigating residuals handling and disposal options, (4) refining cost estimates of effective Cr(VI) treatment technologies, including WBA, strong-base anion (SBA) exchange resin, and reduction/coagulation/filtration (RCF); and (5) convening an expert panel to recommend treatment technologies for demonstration-scale testing.? This research project tested and identified an innovative technology for Cr(VI) removal from drinking water sources. Prior to this study, no treatment technology was proven to achieve removal to low parts-per-billion levels. The research results will benefit the water industry by providing information on effective Cr(VI) treatment technologies, updated costs estimates, and treatment operational conditions. In addition, cost information developed in this study will be of use in regulatory establishment of a Cr(VI)-specific maximum contaminant level (MCL), such as that mandated by the State of California. ?
Chlorine has been used in the treatment of drinking water in the United States since 1908. Since the Safe Drinking Water Act of 1974 and its amendments, utilities around the country have made changes to their disinfection strategies to meet more stringent regulations for either microbial contaminants or disinfection by-products (DBPs). Specifically, utilities have investigated and implemented the use of alternatives to chlorine. Consequently, ozone and chlorine dioxide have been tested and applied at treatment plants for primary disinfection, and the use of chloramines has increased for secondary disinfection.? While it is well accepted by many in the drinking water community that many of these changes will have beneficial impacts, it is not well known how these changes in disinfection will affect distribution system water quality in the long term. Based on a comprehensive literature review and the experience of 26 participating water utilities, potential positive and adverse water quality impacts were identified and summarized when changing from chlorine to either chloramines, ozone, chlorine dioxide, or ultraviolet (UV) light. The data indicated better microbial quality, such as lower coliform levels and heterotrophic plate counts (HPC) and reduced levels of disinfection by-products like trihalomethanes and haloacetic acids. Disinfection changes also led to reduced numbers of customer complaints regarding red or discolored water and tastes and odors. However, two of the more common adverse impacts included some higher HPC levels when using chloramines or ozone and nitrification when using chloramines.?